斷橋鋁型材復合機性能及特點：

Performance and characteristics of the broken bridge aluminum profile composite machine:

1、 本機采用中心卷取及表面接觸并收卷方式；

1. This machine adopts a central winding and surface contact and winding method;

2、 整機由PLC集中控制，并采用觸摸屏人機界面對整機進行集中操作；

2. The whole machine is centrally controlled by PLC and operated through a touch screen human-machine interface;

3、 自動計米、報警等功能；

3. Automatic meter counting, alarm and other functions;

4、 收卷采用A、B氣脹軸結構，裝卸操作方便；

4. The winding adopts A and B inflatable shaft structure, which is convenient for loading and unloading operations;

5、 放卷采用光電自動糾偏修正系統，使不規則材料能正常分切；

5. The unwinding adopts a photoelectric automatic correction system to ensure the normal cutting of irregular materials;

6、 平刀縱切廢邊自動排放裝置；

6. Automatic discharge device for flat blade longitudinal cutting waste edges;

7、 手動式上料，配氣帳軸（3英寸）。

7. Manual feeding, equipped with a 3-inch pneumatic valve shaft.

斷橋鋁型材復合機就是將兩層或者兩層以上的材料用粘合劑粘合成為一體。使原有材料得到新的功能。如薄膜和鋁箔、薄膜、紙張，無紡布等就經常會用到。亦可和膠片、海綿、布料等復合。常見的軟包裝材料基本上都是復合成品。

The broken bridge aluminum profile laminating machine is a process of bonding two or more layers of materials together with adhesive to form a single unit. Give new functions to existing materials. Thin films and aluminum foils, films, paper, non-woven fabrics, etc. are often used. It can also be compounded with film, sponge, fabric, and other materials. Most common soft packaging materials are composite products.

然后是注意斷橋鋁型材復合機的使用環境和精良的前期保護。因為復合機的工作較大，因此應當有用的按期對其做調養，并且還應該給復合機一個精良的工作環境。要確保復合機工作在一個清潔的環境中，盡量的讓復合機闊別塵土，同時，應當包管復合機事情的環境相對枯燥不能濕潤，同時不要在復合機下面板上安排過重的物品，防止環境大概異物對復印機釀成的影響。

Then pay attention to the usage environment and excellent early protection of the bridge breaking aluminum profile laminating machine. Due to the large workload of the composite machine, it should be regularly maintained and given a good working environment. To ensure that the laminating machine operates in a clean environment, try to keep it away from dust as much as possible. At the same time, it should be ensured that the working environment of the laminating machine is relatively dry and not humid. At the same time, heavy objects should not be placed on the bottom plate of the laminating machine to prevent the influence of foreign objects on the copying machine.

在斷橋鋁型材復合機運行時的各種摩擦力中，凹印滾筒和刮墨刀之間的摩擦力對印刷效果和凹版耐印力影響很大。從微觀接觸角度建立凹版滾筒和刮墨刀之間摩擦力的動力學模型，通過模型對影響凹版滾筒和刮墨刀之間摩擦力的因素進行了定性的研究，確定了印刷速度、刮刀角度和凹版印刷機振動對凹版滾筒和刮墨刀之間摩擦力影響的規律。

Among the various frictional forces during the operation of the broken bridge aluminum profile laminating machine, the frictional force between the gravure printing cylinder and the ink scraper has a significant impact on the printing effect and gravure printing resistance. A dynamic model of the frictional force between the gravure cylinder and the scraper blade was established from the perspective of microscopic contact. The factors affecting the frictional force between the gravure cylinder and the scraper blade were qualitatively studied through the model, and the laws of the influence of printing speed, scraper angle, and gravure printing machine vibration on the frictional force between the gravure cylinder and the scraper blade were determined.

本文由斷橋鋁型材復合機友情奉獻.更多有關的知識請點擊:http://www.jiangsu8733.cc我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

This article is a friendly contribution from the Broken Bridge Aluminum Profile Composite Machine For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message