隔熱鋁型材滾壓機自動調刀式三套壓力傳感器，可通過電子顯示器顯示的精確調整，并監控型材，以保證準確調整滾壓的壓力，保證型材滾壓的質量。

Three sets of pressure sensors with automatic blade adjustment for insulated aluminum profile rolling press can be displayed on electronic displays for precise adjustment and monitoring of profiles to ensure accurate adjustment of rolling pressure and quality of profile rolling.

工作方式：用3組硬質滾壓輪，將穿有隔熱條的鋁合金型材壓合。滾壓輪調節：每個滾壓輪都能獨立的調節（上下、左右），并通過數字顯示，第三道滾壓輪在滾壓過程中，可進行校直，以確保隔熱型材的平行度和直線度。此設備為六套動力系統，六組擠刀都帶主驅動力，保證型材在擠壓過程中受力均衡，進料速度快，工作效率高。此設備適用于鋁木、鋁塑等各種斷橋鋁型材

Working method: Use three sets of hard rolling wheels to press the aluminum alloy profile with insulation strips. Rolling wheel adjustment: Each rolling wheel can be independently adjusted (up and down, left and right), and displayed through numbers. The third rolling wheel can be straightened during the rolling process to ensure the parallelism and straightness of the thermal insulation profile. This equipment has six sets of power systems, and all six sets of extrusion knives are equipped with main driving force, ensuring that the profile is subjected to balanced force during the extrusion process, with fast feeding speed and high work efficiency. This device is suitable for various broken bridge aluminum profiles such as aluminum wood, aluminum plastic, etc

鋁型材（輥）滾壓機/設備優勢：此設備為自動調刀式，更換型材時，工作臺電動升降自動對準型材擠壓部位，托料架高度不必調節，非常省事。上下兩片刀可以單獨調節高度，對各類異型材包括一些兩側隔熱條不在同一個水平面擠壓的型材非常實用。

Advantages of aluminum profile (roller) rolling press/equipment: This equipment is an automatic knife adjustment type. When replacing profiles, the electric lifting of the workbench automatically aligns with the extrusion part of the profile, and the height of the support frame does not need to be adjusted, which is very convenient. The height of the upper and lower blades can be adjusted separately, which is very practical for various types of profiles, including profiles with insulation strips on both sides that are not extruded in the same horizontal plane.

隔熱斷橋鋁型材輥壓機技術參數：

Technical parameters of thermal insulation bridge breaking aluminum profile roller press:

電 源：380V，50Hz

Power supply: 380V, 50Hz

功 率:3.5Kw

Power: 3.5Kw

驅動方式：六驅

Drive mode: Six wheel drive

滾刀直徑：220mm

Roller diameter: 220mm

上下滾刀間距調節范圍:0100mm

Adjustment range of upper and lower roller spacing: 0100mm

浮動工作臺高度調節范圍：0100mm

Floating worktable height adjustment range: 0100mm

型材進給速度：變頻調速0-70m/min

Profile feed speed: variable frequency speed regulation 0-70m/min

設備外形尺寸：1600×900×1600

Equipment dimensions: 1600 x 900 x 1600

左右輔助托料架尺寸：5800×420×1000mm(高度可調）

Size of left and right auxiliary support racks: 5800 x 420 x 1000mm (height adjustable)